Change engine oil and filter. Check and fill all fluid levels,Check and set tire pressures, perform complete visual inspection.
Rotate Tires
WIPER BLADES – INSPECT BRAKE SYSTEM – INSPECT – [Visually inspect brake linings/drums and brake pads/discs.] FLUID LEVELS – INSPECT – [Inspect and adjust all fluid levels.] DRIVER'S FLOOR MAT – CHECK – [Check installation of driver's floor mat. Only use the driver's floor mat designed specifically for the model and model year of the vehicle. Always properly secure the driver's floor mat using the retaining hooks. Never install another floor mat on top of the existing driver's floor mat. Never install the driver's floor mat upside down.] ENGINE OIL & FILTER – REPLACE – [Reset the oil replacement reminder light ("MAINT REQD") or the message "OIL MAINTENANCE REQUIRED" on the multi-information display after maintenance at every 5,000 miles.] ENGINE COOLANT – REPLACE TIRES – ROTATE – [Check tire tread depth and for uneven or excessive wear.]
Robert B. gave our service a 5 star review on 4/21/2021
REAR AXLE FLUID – INSPECT TRANSFER CASE FLUID – INSPECT
WIPER BLADES – INSPECT BALL JOINT & DUST COVERS – INSPECT – [Check the suspension and steering linkage ball joins for looseness and damage. Check all dust covers for deterioration and damage. Replace any deteriorated or damaged parts.] BRAKE HOSES & LINES – INSPECT – [Visually inspect for proper installation. Check for chafing, cracks, deterioration and signs of leaking. Replace any deteriorated or damaged parts.] BRAKE SYSTEM – INSPECT – [Visually inspect brake linings/drums and brake pads/discs.] DRIVER'S FLOOR MAT – INSPECT – [Only use the driver's floor mat designed specifically for the model and model year of your vehicle. Always properly secure the driver's floor mat using the retaining hooks. Never install another floor mat on top of the existing driver's floor mat. Never install the driver's floor mat upside down.] DRIVESHAFT/PROPELLER SHAFT DUST BOOTS – INSPECT – [Check the drive shaft boots and clamps for cracks, deterioration and damage. Replace any deteriorated or damaged parts and, if necessary, repack the grease.] ENGINE COOLING SYSTEM HOSES & CLAMPS – INSPECT EXHAUST PIPES & MOUNTS – INSPECT – [Visually inspect the exhaust pipes, muffler and hangers for cracks, deterioration and damage. Start the engine and listen carefully for any exhaust gas leakage. Tighten connections or replace parts as necessary.] FLUID LEVELS – INSPECT – [Inspect and adjust all fluid levels.] RADIATOR & CONDENSER – INSPECT – [Inspect for damage, debris, dirt, insects and signs of leakage.] STEERING GEAR/RACK – INSPECT – [Check for damage/leaks.] STEERING LINKAGE & BOOTS – INSPECT – [With the vehicle stopped, check for excessive freeplay in the steering wheel. Inspect the linkage for bending and damage and the dust boots for deterioration, cracks and damage. Replace any damaged parts.] TIRES – ROTATE – [Check tire tread depth and for uneven or excessive wear.]
BilliJo R. gave our service a 5 star review on 4/18/2021